Pricing & Services

OIL BASED COATINGS:

SEE VIDEO BELOW THAT GOES OVER ALL THE SERVICES!

Service Clear Black Details
Level 1 (Re-Application) $150 $150+ Standard yearly re-application, surcharge applies after 13 months
Level 2 (Base Job) $200 $250 Frame & structural components, suspension, steering, major underside & inner structural-panels, doors, basic under hood treatment, tailgate. Spare tire & basic body plugs removed **** Great protection in major areas but sub-par in hard to access areas. Not recommended for trucks, Suvs or any vehicles with undercarriage covers
Level 3 (Trucks, SUVs, cars with undercarriage covers. $350 $375 Adds on + EXTENSIVE service focusing on hard to access areas, extensive inner frame-panel service. ALL UNDERCARRIAGE PANELS COMPLETELY REMOVED. Taillight removal or rear quarter panel access. Premium door/under hood package. Almost double spray time.
Level 4 (Most popular, a must for a new or nice vehicle. Warranty only applies to L4 service) $600 $600 Adds on + wheel & complete wheel liner removal. HD heated product on high wash areas. Most extensive job, custom to vehicle This level removes the wheels/tire and then completley removes the inner wheel liners. You cannot treat the double walled wheel arches without removing these liners!! All vehicles will rust in these areas if not treated.
Commercial Vehicles Call Call We can undercoat ANY sized commercial vehicle. Call for more information

Our services above use a combination of our Steel City Oil and traditional Fluid Film.

UNLIKE other shops who just soak the underneath of your vehicle, we do the following:

Specialty Silicone grease applied to protect all bushings and non oil resistant rubber. Masking/avoiding all major electronics and evap/emissions systems.

**Clear product is the most popular and a must for new or newer vehicles that do not have significant rust. Clear product is also very popular on older or even rusty vehicles for someone who does not care about undercarriage cosmetics or wants a more clean-cut product. In general, most vehicles 2016+ we would recommend clear coating, as they do not need the black.

Black product is an option for a vehicle with substantial rust/wear for someone who wants a newer looking finish. If you elect black, we coat the structural parts with black and the body panels clear.

If you have a vehicle that needs substantial descaling work, we will only offer black if you have the decaling work performed. You can absolutely decline the descaling work and have the vehicle coated and yes it will certainly help, but we will only offer the clear product. See descaling section below.

GM vehicles with wax coatings that are still in satisfactory shape will use our GM wax product treatment. Wax in poor shape will utilize oil based product. GM or any vehicle with factory wax or aftermarket undercoating are treated as needed on areas with existing factory undercoating

Remember, this service cost less than a set of tires! Tires you can replace. Blown engine you can replace. A rusted out or rotted frame is going to the junkyard! The average rocker panel replacement, wheel arch or major rust repair to body panels or frame repair is well over $3000.00!

Annual application is recommended for optimal results per our experience and manufacturers’ guidelines. This gives you an affordable yearly option to keep your vehicle rust-free. The yearly recoat price is only valid for customers who return within 13 months of their last service. If you are over 13 months we may surcharge you based on product use. Not applicable to commercial vehicles. Future re-coat price can vary based on industry costs.

*** Above prices and reapplication prices reflect April 1, 2022 market increase. This was due to a substantial product increase from chemical companies, steel drum containers and general labor.

Services Overview

Annual Re-Application


DESCALING SERVICE $300+

For vehicles with excessive rust.

Descaling is recommended on ALL vehicles that has gone too long and have anything more that surface rust. (Usually 2016 and prior) Descale of frame and structure components will eliminate 85% + of existing rust/scale. After descaling and cleaning, we apply one of our oil-based product packages. The price of descaling depends on the vehicle and condition, but the average price is around $300-$600. Descaling we usually need the vehicle for 2 days. We do an outstanding job with the descaling process and provide before and after pictures to every customer.

WELDING

We offer full frame repair and welding service! We can fix or repair almost any frame or undercarriage structural issue.